Polyaluminium chloride is used in summer

With the arrival of summer, the temperature is getting higher and higher, due to the rise in summer temperature, the acceleration of molecular exercise, whether it is domestic sewage or industrial sewage once the treatment is not timely will appear black odor, so summer is also the peak of the use of water purification products, then, in this hot season to use polyaluminum chloride need to pay attention to what, What effect does high temperature have on polyaluminium chloride?

According to the molecular structure of polyaluminum chloride, PAC was found to be an active molecular mass. When the temperature changes, its internal structure changes. This molecular structure is relatively stable between 5 degrees and 20 degrees. The temperature in summer is much higher than 20 degrees, when the temperature is higher, the dissolution rate and reaction rate of polyaluminum chloride will be accelerated, so the dissolution and reaction time can be appropriately adjusted. Especially in the outdoor case, humidity and rain will lead to changes in the concentration of polyaluminum chloride and the quality of sewage, at this time, it is necessary to conduct another small test to measure the reasonable use of polyaluminum chloride. In the summer purification water to add polyaluminum chloride, will form a large flower dense, fast, water purification effect is obvious. When the dosage is small, the reaction of polyaluminum chloride can still be accelerated at high temperature.

In summary, there are several aspects that need to be noted in the use of polyaluminum chloride water purification products in summer. However, the high temperature in summer did not affect the flocculation effect of polyaluminum chloride.


Wholesale POLYALUMINUM CHLORIDE LIQUID Manufacturer and Supplier | EVERBRIGHT (

Wholesale POLYALUMINUM CHLORIDE POWDER Manufacturer and Supplier | EVERBRIGHT (

Post time: Aug-11-2023